Product Description
SoundBurster Ultrasonic Sound Generator artificially pressurizes rooms, cabins, and enclosures. It works in conjunction with any detector. Burst Mode helps break resonances, as it acts like a sound hammer.
Use it for:
Leak Detection of Static Leaks where no pressure or vacuum can be applied to test enclosures such as:
- Building Doors, Window Seals and Roofs
- Walk-in Refrigerator and Freezer Door Seals
- Display Cooler Door Seals
- Automobile Windshields
- Automobile Door and Trunk Seals
- Aircraft Window and Door Seals
- Ship Bulkheads
- Ship Bulk Carrier Covers
- Refrigerated Trailers
- Refrigerated Shipping Containers
- Shipping Containers
- Tanks & Trailers
- Vessels
- Multiple units can operate together in the same space
Other Details
This is a test to see about Other DetailsIncluded Accessories for the ultrasonic leak detector:
- Patented Resonator Touch Probe permits detection of internal leaks and other mechanical problems. It mounts in front of sensor and converts internal, structure borne, sounds to airborne ultrasonic sound to help detect problems such as sticky expansion valves or flow restrictions.
- High quality folding headset with volume control included.
- Hard shell foam padded carrying case - compartmentalized and lockable
- Wave Guide – ¼” (used to access tight inaccessible points)
| SoundBurster II Specifications | |
| Mechanical | |
| Dimensions: (LWD) | 4.15” (10.5cm) X 2.4" (61mm) X .875" (22.22mm) |
| Overall Length: | 5.5” (14cm) |
| Body Materials: | ABS / Aluminum |
| Body Finish: | Black ABS / Black Anodized Aluminum |
| Top Label: | Velvet Lexan, Back Printed |
| Camera Mounting Hole | 1/4-20 UNC |
| Weight: | 0.3lb (138gr) Includes Battery |
| Electrical | |
| Ultrasonic | 11.25 Pa @ 30cm |
| Output Sound Pressure | 40kHz, Light Indicator-Red Steady |
| Frequency Output 1, CW | 40kHz Symmetrical Square, 250ms ON / 250ms OFF,Indicator-Red Flashing |
| Frequency Output 2, Burst | 38 kHz to 42 kHz, Linear Sweep, Indicator-Green Steady |
| Frequency Output 3, Sweep | 38 kHz to 42 kHz, Linear Sweep, Indicator-Green Steady |
| Frequency Output 4, Chirp | Bursts of 38-42kHz Linear Sweeps, Indicator-Green Flashing |
| Sonic | Replica of Ultrasonic Mode in Audio |
| Sonic Mode | Selectable ON/OFF |
| Controls | 2 Buttons |
| ON Indicator - Battery Good | Green LED |
| Low Battery Indicator | Flashing Red LED |
| Battery Type: | 9 Volt alkaline or rechargeable battery |
| Run Time: | 70-90 hrs |
